In this paper, the structure improvement of the rice cutter's paddle collector is introduced.It is used to pick up the harvest.CentralizationFast,At least one circle of round steel is rolled out.After that, the lower surface of the ring is hung out and horizontally folded to form a rectangular socket.On the other side of the ring, slightly extend the shift shaft along the circumference of the ring.After protruding for a short period, bend down slightly and straight out.A small arc circle is formed here.And the pull-out axis is just opposite to the rolling out point of the rectangular socket.The collecting shaft is arranged on the long circular shaft body through the inner diameter of the ring.And a plane is arranged in the axial direction of the long circular axis body.A screw hole is arranged on the plane.The rectangular socket is fixed by screws.The structure improvement of the rice cutter paddle collector is made up of the above components.Will lie flat.Skew,The disordered harvester is pulled up with a collecting shaft.Centralization,DiversionThe purpose of the whole line by the cutter.本創作割稻機撥集器結構改良，用在收割物撥起、集中，快速，設以圓形鋼材捲出至少一環圈，後於環圈低面垂出水平折出長方形納口，在環圈另一側稍上順著環圈周徑凸伸撥集軸，在凸伸一小段後稍稍向下彎折直出，在此形成小弧圓，且撥集軸與長方形納口捲出點剛好相反，該撥集軸由環圈內徑穿設在長圓軸體上，並在長圓軸體軸向設平面，該平面上設螺孔，在長方形納口由螺絲鎖固；上述組成割稻機撥集器結構改良，將平躺、倒斜、混亂收割物用撥集軸撥起、集中、分流、整列由切割器之目的。
