PROBLEM TO BE SOLVED: To solve the inconveniences in watering equipment for gardening that a hose must be laid till a watering location after one end of the hose is attached to a faucet if the faucet is 10 m or 20 m away from the watering location, and watering becomes possible after going back to the faucet once to open it and going back to the watering location again and that water is wastefully released during going back and forth between the faucet and the watering location.SOLUTION: A solenoid valve body attached with one end of a hose is attached to a faucet, the faucet is opened at this point, and the hose is laid till a watering location. Watering becomes possible by switching "on" of the on/off switch of a nozzle body without returning to the location of the faucet here. When watering is finished and if the on/off switch is switched to "off", the release of water is stopped, and thereby the inconvenience of releasing unnecessary water until returning to the faucet and closing the faucet as before is solved.SELECTED DRAWING: Figure 1COPYRIGHT: (C)2017,JPO&INPIT【課題】園芸用散水装置では蛇口から散水箇所まで10m、20mと離れている場合は蛇口にホースの一端を取付けてからホースを散水箇所まで敷設して、一旦蛇口まで戻って水栓を開き再度散水箇所まで戻って散水を行うという不便があり、蛇口と散水箇所まで往復するあいだに無駄な水を放出するという不便もあった。【解決手段】ホースの一端を取付けた電磁弁体を蛇口に取付けて、この時点で水栓を開いてホースを散水箇所まで敷設をする。ここで水栓の箇所まで戻ることなくノヅル体の切/入スイッチを「入」とすることにより散水できるようにした。散水が終了したら切/入スイッチを「切」とすれば水の放出は止まり、従来のように蛇口まで戻って水栓を閉めるまでのあいだ無駄な水を放出するという不便さをなくした。【選択図】図1
