PROBLEM TO BE SOLVED: To provide a high branch cutting saw which can cut a high branch by just grasping a handle and pulling a sliding gripper using a saw and a holding bar for clamping a branch which are mounted at the tip of a pipe in order to cut a high branch.SOLUTION: A saw tooth 1 mounted on the tip of a pipe 3 and a holding bar 2 mounted to clamp a branch are mounted on a stay 10 mounted on the tip of the pipe, a spring 13 is provided in a fulcrum 6 thereof so that the holding bar is always opened from the saw tooth by the restitution of the spring, the stay is connected to a sliding gripper 4 by a wire 11, and a holding part spring 9 is inserted into the gap between the stay and the sliding gripper so as to prevent the branch from being held more strongly than necessary. A pulling part stopper 7 is a stopper for stopping the sliding gripper, an opening part stopper 8 is a stopper for preventing the holding bar from opening too much, and a guide 12 is for suppressing waving of the wire.SELECTED DRAWING: Figure 1COPYRIGHT: (C)2017,JPO&INPIT【課題】高い場所の枝を切断するために、パイプの先端に取り付けた、鋸と枝を挟む押え棒によって、持ち手を握りスライド握り手を引くだけで、高い場所の枝を切断出来る高枝切る鋸を提供する。【解決手段】パイプ3の先端に取り付けられた鋸歯1と枝を挟む為に取り付けた押え棒2をパイプの先端部に取り付けたステー10に付け、その支点6にはバネ13を設け、常に鋸歯よりバネの反発力で押え棒が開く様にし、ステーとスライド握り手4の間は、ワイヤー11で接続され、その間には押え部スプリング9を入れることで必要以上に枝を押えこまない為の物である。引き部ストッパー7は、スライド握り手を止めるためのストッパーで、開き部ストッパー8は、押え棒が開き過ぎるのを止めるためのストッパーで、ガイド12はワイヤーが波打つのを抑える物である。【選択図】図1
