< Topic >Supply position of the scaly stem vegetables it designates that the adjustment possible disconnection device is offered as topic. SolutionsDisconnection device 1, in the support component 52 where the rotary board the based component from Drive device of 20 which supports 10 where the containment channel 12 was formed and rotary board 10 and rotary board 10 and the containment channel 12 the disconnection blade you hold down 40 which disconnects the pedicle section which is extended to reverse side 30 and the scaly stem vegetables to the surface of rotary board and 10 the holding down component opposing to the surface of 50 which is attached and rotary board, 10 the guide plate 60 which is laid out and, you have, as for holding down component 50, is installed on the surface of rotary board 10 and support component 52 tilt the arm 51 which is supported unrestrictedly and,The pushing pressure component directing the Tip of 54 which is provided in the Tip of arm 51 and arm 51 to rotary board 10, it possesses with the energization component 53 which energization is done, directing the basic destal of arm 51 to rotary board 10 attendant upon the revolution of rotary board 10, the guide aspect which it makes displace is formed in guide plate 10, guide plate 60 is transfer of facilities unrestricted around revolving shaft 11 vis-a-vis based component 20. < Choice figure >Drawing 1【課題】鱗茎菜類の供給位置を調整可能な切断装置を提供することを課題とする。【解決手段】切断装置1であって、保持溝12が形成された回転板10と、回転板10を支持するベース部材20と、回転板10の駆動装置30と、保持溝12から裏側に突出した茎部を切断する切断刃40と、鱗茎菜類を回転板10の表面に押さえ付ける押さえ部材50と、回転板10の表面に対向して配置されたガイド板60と、を備え、押さえ部材50は、回転板10の表面に取り付けられた支持部材52と、支持部材52に傾動自在に支持されているアーム51と、アーム51の先端部に設けられた押圧部材54と、アーム51の先端部を回転板10に向けて付勢する付勢部材53とを有し、ガイド板10には、回転板10の回転に伴って、アーム51の基端部を回転板10に向けて変位させるガイド面が形成され、ガイド板60はベース部材20に対して回転軸11周りに移設自在である。【選択図】図1
