Generating an aspheric contact lens design for facilitating myopia control of a cornea of a patient includes operations of: obtain measurement for degree refractive error of the eye in diopters; obtain measurement of one or more biomechanical properties of the cornea; define a diameter of a central zone of the contact lens based on pupil size; select a base curve profile and width for the central zone based on the refractive error and the one or more biomechanical properties; define a width of a reverse zone adjacent to and encircling the central zone, the width being greater than 0.5 mm; select a reverse curve profile for the reverse zone compatible with the base curve profile; modify the base curve profile adjacent to the reverse zone by applying a selected base eccentricity curve profile for enhancing the tension force strength of the reverse zone; define a width of a relief zone of the contact lens adjacent to and encircling the reverse zone; select a relief curve profile for the relief zone; define a width of an alignment zone of the contact lens adjacent to and encircling the relief zone; select an alignment curve profile for the alignment zone; and define a width of a peripheral zone of the contact lens adjacent to and encircling the alignment zone; select a peripheral curve profile for the peripheral zone; wherein the compression force strength and the tension force strength of the contact lens cooperate to reshape corneal curvature in a mid-peripheral region to address the myopia control when the contact lens is applied to the eye.