Walking pattern device for disabled people composed of two independent units, one of them is a chassis that bears the body of the movement and the other unit is an exoskeleton fastening for the user and characterized because the device is constituted to starting from a chassis (1) constituted from a beam as a main horizontal support (42) and having at its ends with respective perpendicular beams as a front support (43) and rear support (41). in the front support (41) there are two double lugs (44) formed by respective plates perpendicular to said support with a hole in its middle where there is an axis (12) that supports separate trestles (13) crossed by an axis ( 14) that integrates two bridge (15), integral with two support beams (10), which support the two large support platforms (11) where the patient will support the special treatment boot (21). the support beams (10) at the opposite end are firmly supported by two pedals-rods (6) which in turn are integral with a steering wheel (4) driven by an electric motor (2) that has a connection electrical to the network (3). the chassis (1) has in its central part a main vertical support stringer (7) and in its middle part has two horizontal adjustment pins (8) that are inserted into the horizontal beams (46) of the rear sub-frame (47), formed by three hollow beams in the form of "U" open towards the front and whose rear vertical crossbeam supports the rotation axis of the steering wheel (4) and pedals-rods (6). the actual exoskeleton is constituted by two boots (21) supported on the support platforms (11) and to which they are fastened with respective fixings (21) preferably constituted by adaptable belts. these boots (21) firmly bear a tibial stringer (23), consisting of a thin, narrow and long plate (23) with two joints at both ends, articulation of the tibial stringer (25) and middle joint (27) and a length adjustment element (24) in its middle part. starting from the middle joints (27) there are two stringers simil
